eBay Classifieds » All ads » For sale » 

lathe in Albany

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "lathe" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. 1973 Leblond 24" REGAL 5 INCH THRU-SPINDLE (Engine Lathe)

    1973 Leblond 24" REGAL 5 INCH THRU-SPINDLE Manual Engine Lathe Swing Over Bed: 24" Distance Between Centers: 120" Spindle Bore: 5.250" Spindle Motor: 20 HP Chuck Size: 24" -EQUIPPED WITH- 24 Inch 4 Jaw Chuck (2) Steady Rests Taper Attachment Newall DRO More Info: http://2spade.com/1973Leblond24REGAL5INCHTHRUSPINDLE.html

  2. 1944 Bullard SPIRAL DRIVE 54 (Manual Vertical Turret Lathe)

    1944 Bullard SPIRAL DRIVE 54 Manual Vertical Turret Lathe Table Size: 54" Table Motor: 50 HP Number of Jaws: 4 Height Under Rail: 36" Voltage: 480/220/3 Machine Size (H/L/W): 132"/ 108"/ 108" Machine Weight: 27,000 LBS -EQUIPPED WITH- 5 Station Tool Turret Side Head More Info: http://2spade.com/1944BullardSPIRALDRIVE54.html

  3. 1976 Sundstrand V12 (CNC Vertical Turret Lathe)

    1976 Sundstrand V12 CNC Vertical Turret Lathe Control: Fanuc 18-T Maximum Swing: 63" Maximum Turning Diameter: 55" Height Under Rail: 41.5" Vertical Ram Travel: 31" Horizontal Rail Travel: 37" Travel Below Saddle: 22" Rapids: 300 IPM Cross Rail Motor: 5 HP Table Motor: 50 HP Table Speed: 3.3 - 295 RPM -EQUIPPED WITH- 46"Table Mounted With 60" Faceplate 5 Station Turret Table Guards ***Retrofit To Fanuc Control Done 1994*** More Info: http://2spade.com/1976SundstrandV12.html

  4. 1969 Bullard DYNATROL 56 (Vertical Turret Lathe)

    1969 Bullard DYNATROL 56 Vertical Turret Lathe Maxium Swing: 68" Height Under Rail: 48" Vertical Travel of Turret Head: 30-3/4" Vertical Travel of Ram: 51" Table Diameter: 56" Table Motor Power: 75 HP Table Speeds: 8.2 - 300 RPM -EQUIPPED WITH- Digital Read Outs 56 Inch, 4 Jaw Chuck Boring & Side Head More Info: http://www.2spade.com/1969BullardDYNATROL56.html

  5. 1984 Clausing COLCHESTER 17 (Engine Lathe)

    1984 Clausing COLCHESTER 17 Manual Engine Lathe Full Model: COLCHESTER 17 X 40, 8100 SERIES Swing Over Bed: 17-1/4" Swing Over Cross Slide: 10-1/2" Distance Between Centers: 40" Bar Capacity: 3" Spindle Nose: 8" D 1 CAMLOCK Spindle Hole Thru: 3-1/16" Spindle Speeds: 20 - 1,600 RPM Spindle Motor: 10 HP Machine Weight: 6,000 LBS -EQUIPPED WITH- Geared Head Stock Tail Stock Tool Post Threading (Metric & Inch) 10" 3-Jaw Chuck Pull Out Chip Pan Cross & Longitudinal Feeds Coolant ...

  6. 1978 Tsugami T-SPL1 (Manual Chucker, Turret Lathe)

    1978 Tsugami T-SPL1 Manual Chucker, Turret Lathe Max Swing Over Bed: 13" Swing Over Cross Slide: 8" Max Spindle Nose to Turret: 14" Chucking Capacity, Round: 1-1/16" Threading Diameter Maximum, External: 6" Threading Diameter Maximum, Internal: 5" Threading Length Capacity, Maximum: 1-3/4" Threading Pitch Diameter, Maximum: 12 TPI Number of Turret Positions: 8 Spindle Speeds, Variable Range: 125 to 3000 RPM Spindle Nose: 5C Spindle Motor, Horsepower 1.5 HP Machine ...

  7. 1944 Leblond NI 34/60 x 96/164 (Manual Sliding Gap Engine Lathe)

    1944 Leblond NI 34/60 x 96/164 Manual Sliding Gap Engine Lathe Swing over bed, gap closed: 34" Max center distance: 96" closed / 164" open Swing over slide: 21.5" Swing through gap: 60" Max length of part turned in gap: 68" Spindle nose: L-3 Spindle speeds: (32) 3.25 to 400 RPM Taper in tailstock: #6 Width of bed: 26" Width of carriage: 40" Threads: (48) ¾ to 46 TPI Feeds: (48) . 004 IPR to .250 IPR Main motor: 40 HP 220V Approx dimensions: 15-1/2'L x 61/2'W x 7'H ...

  8. 1997 Acer DYNAMIC 1740G (Manual Engine Lathe)

    1997 Acer DYNAMIC 1740G Manual Engine Lathe Swing Over Bed: 17" Distance Between Centers: 40" Swing Over Cross Slide: 9-5/8" Spindle Center Height: 8-1/2" Spindle Bore Diameter: 2-1/4" Spindle Nose: D1-6 Spindle Speeds: 50-1,800 RPM Spindle Motor: 7.5 HP Tailstock Taper: MT 4 Machine Dimensions: 88"L x 41"W x 67"H Machine Weight: 4,000 LBS -EQUIPPED WITH- 10" 3-Jaw Chuck Inch & Metric Threading Steady Rest 4-Way Tool Post Coolant System Full Length Splash Guard ...

  9. 1998 Clausing Metosa EL2087CS (CNC Engine Lathe)

    1998 Clausing Metosa EL2087CS CNC Engine Lathe Control: Fagor 800T Swing Over Bed: 20.875" Swing In Gap: 30.75" Swing Over Cross Slide: 12.75" Distance Between Centers: 87" Spindle Nose: D1-8 Spindle Speeds: 0-1,700 RPM Spindle Motor: 10 HP Spindle Bore: 3.150" Tailstock Taper: 5 MT Tailstock Travel: 7" Machine Weight: 6,200 LBS -EQUIPPED WITH- 14 Inch, 4 Jaw Chuck Aloris Style Tool Post (6 Tools) External Transformer More Info: http://2spade.com ...

  10. 1996 Citizen CINCOM M20 (CNC Swiss Type Lathe)

    1996 Citizen CINCOM M20 CNC Swiss Type Lathe CNC Control: Mitsubishi Meldas 530LHC Max. Machining Diameter: .787" (20mm) Max. Machining Length per Chucking: 12.6" Main Spindle Indexing: Full "C" Axis Sub Spindle Indexing: 15 degree Spindle Speeds (Main Spindle Drive): 200 - 8100 rpm Spindle Speeds (Back Spindle): 180 - 7200 rpm Rotary Tool Spindle (Gang Plate): 250 - 5000 rpm Rotary Tool Spindle (Turret): 320 - 6300 rpm Backworking (Max. Chucking Dia): .787" (20mm) Backworking (Max. ...

  11. 1943 Bullard SPIRAL DRIVE 36 (Manual Vertical Turret Lathe)

    1943 Bullard SPIRAL DRIVE 36 Manual Vertical Turret Lathe Table Size: 36" 4 Jaw Height Under Rail: 26" Table Speed 10 To 200 Rpm Feeds: .002 To .500 I.P.R. Main Motor: 20 HP Turret Head Travel Left To Right 21" Turret Ram Head Turret Travel Up & Down: 27" Turret Head Position: 5 Turret Head Swivel: Yes More Info: http://2spade.com/1943BullardSPIRALDRIVE36.html

  12. Cincinnati HYDROSHIFT 19X54 (Manual Engine Lathe)

    Cincinnati HYDROSHIFT 19X54 Manual Engine Lathe Swing Over Ways: 19" Swing Over Cross Slide: 11.5" Distance Between Centers: 54" Spindle Hole: 1.750" Spindle Taper: L-1 Spindle Speeds (12): 15-1,470 RPM Cross Slide Travle: 12" Top Slide Travel: 3.250" Bed Size: 13.875"W x 10.875"D Tailstock Taper: MT4 Tailstock Travel: 5" -EQUIPPED WITH- Taper Attachment Digital Read Out More Info: http://2spade.com/CincinnatiHYDROSHIFT19X54.html

  13. 1953 Jones & Lamson 7A (Manual Turret Lathe)

    1953 Jones & Lamson 7A Manual Turret Lathe Swing Over Bed: 21" Swing Over Cross Slide: 13" Max Turning Length: 37" Spindle Bore: 3" Bar Capacity: 2.5" Spindle Nose: A1-8 Spindle Speed: 1,500 RPM Number of Turret Stations: 6 More Info: http://2spade.com/1953Jones&Lamson7A.html

  14. 1981 Leblond 24" REGAL 9" HOLLOW SPINDLE (Oil Country Engine Lathe)

    1981 Leblond 24" REGAL 9" HOLLOW SPINDLE Oil Country Type Engine Lathe Swing Over Bed: 24" Distance Between Centers: 135" Spindle Bore: 9" Spindle Motor: 20 HP Chuck(s) Diameter: 24" -EQUIPPED WITH- Double Chuck on Headstock Taper Attachment Newall DRO ***Rebuilt in 2000*** More Info: http://2spade.com/1981Leblond24REGAL9HOLLOWSPINDLE.html

  15. 1978 Lodge & Shipley 3220 WHD POWER TURN (Oil Country Engine Lathe)

    1978 Lodge & Shipley 3220 WHD POWER TURN Oil Country Type Engine Lathe Swing Over Bed: 32" Distance Between Centers: 200" Spindle Bore: 12.5" Spindle Motor: 50 HP -EQUIPPED WITH- Double Chuck System Eurotherm DC Drive Taper Attachment Newall DRO ***Lathe Rebuilt in 1998*** More Info: http://2spade.com/1978Lodge&Shipley3220WHDPOWERTURN.html

  16. 1951 Bullard CUTMASTER 42 (Vertical Turret Lathe)

    1951 Bullard CUTMASTER 42 Vertical Turret Lathe Table Diameter: 42" Max Swing With Side Head Down: 54" Max Swing With Side Head Up: 45" Vertical Travel of Turret: 30-3/8" Vertical Travel of Side Head: 37-1/4" Max Height Under Rail: 37" Max Height Under Turret Head: 48-1/4" Table Motor: 30 HP Table Speeds: 4 - 150 RPM -EQUIPPED WITH- Side Head 5 Station Tool Turret Tracers (on Side Head & Left Saddle) 42" 4-Jaw Chuck Sony 4 Axis DRO Coolant Pan More Info: http://2spade.com ...

  17. 1968 Binns & Berry TB 12.5 (Engine Lathe)

    1968 Binns & Berry TB 12.5 Manual Engine Lathe Serial Number: 9385 Swing Over Ways: 25" Swing Over Cross: 21" Distance Between Centers: 252" Spindle Bore: 4" -EQUIPPED WITH- Taper Attachment Steady Rests More Info: http://2spade.com/1968Binns&BerryTB125.html

  18. 1941 American 24X240 (Manual Engine Lathe)

    1941 American 24X240 Manual Engine Lathe Swing Over Bed: 24" Distance Between Centers: 240" Spindle Bore: 2" Spindle Motor: 25 HP Spindle Speed: 11-450 RPM -EQUIPPED WITH- 4-Jaw Chuck Steady Rest More Info: http://2spade.com/1941American24X240.html

  19. Ex-Cell-O X-1100 (CNC Vertical Turret Lathe)

    Ex-Cell-O X-1100 CNC Vertical Turret Lathe Control: Fagor 8055 Table (Chuck) Diameter: 30" Swing: 42" Table Motor: 100 HP Max. Workpiece Height: 28" Number of Turret Stations: 6 Tools Tool Holder Taper: ISO-50 Machine Dimensions: 134"L x 100"W x 136"H -EQUIPPED WITH- Air Conditioner for Electrical Cabinet Full C-Axis Thru Spindle Coolant (live tools) Spindle Orientation Electric Torque Limit Complete splash guards ***THIS MACHINE IS A RETROFIT FROM MANUAL TO CNC** ...

  20. 1942 Axelson A 32 (Manual Engine Lathe)

    1942 Axelson A 32 Manual Engine Lathe Max Swing Over Bed: 32.5" Distance Between Centers: 432" Bed Length: 504" Spindle Motor: 25 HP -EQUIPPED WITH- 28" Chuck 4 Steady Rests Tailstock More Info: http://2spade.com/1942AxelsonA32.html

  21. 1981 Kuraki LC-403 (Oil Country & Hollow Spindle Lathe)

    1981 Kuraki LC-403 Oil Country & Hollow Spindle Lathe Swing Over Bed Ways: 30" Swing Over Cross Slide: 20-3/4" Bed Way Width: 22" Spindle Hole: 12-1/2" Center Distance: 120" Spindle Speeds: 5 To 350 Rpm's Spindle Nose: A-20 Tail Stock Quill Diameter: 3-1/2" Tail Stock Quill Travel: 11-13/16" Tail Stock Taper: 6 MT Main Motor: 30 Hp Machine Dimensions: 144"L x 102"W x 75"H Machiner Weight 18,000 Lbs. -EQUIPPED WITH- (2) 24" 4-Jaw Chucks Longitudnial & Cross Feeds Metric & Inch ...

  22. John Lang 44x100
    Please Contact

    John Lang 44x100 Engine Lathe Swing Over Ways: 44" Distance Between Centers: 100" Spindle Speeds: 13~380 RPM Spindle Bore: 4.5" Main Motor: 30 HP Chuck Diameter: 40" (4 Jaw) -EQUIPPED WITH- 40" 4-Jaw Chuck Spare Chuck Steady Rest Inch/Metric Threading Tool Post More Info: http://2spade.com/JohnLang44x100.html

  23. 2004 Haas TL-2 (CNC Tool Room Lathe)

    2004 Haas TL-2 CNC Tool Room Lathe Control: Haas Swing Over Ways: 19" Swing Over Cross Slide: 11.1" Max Cutting Diameter: 16" Centers Distance: 48" Spindle Nose: A2-6 Spindle Bore: 3" Spindle Speed: 1,800 RPM Spindle Motor: 12 HP Tailstock Taper: MT#4 Tailstock Stroke: 33.5" Machine Dimensions: 101"L x 55"W x 78"H Machine Weight: 5,000 LBS More Info: http://2spade.com/2004HaasTL2.html

  24. 1960 American 3220 (CNC Engine Lathe)

    1960 American 3220 CNC Engine Lathe Maximum Swing: 44" Swing Over Carriage: 34" Distance Between Centers: 120" Spindle Speeds: 8-1200 RPM Spindle Hole Diameter: 3" Spindle Drive Motor: 50 HP -EQUIPPED WITH- Power Mate (Automation America) CNC Control (Retrofit 2004) Note: CNC Control, Relays & Wiring Upgraded in 2004 Retrofit! The drive motor reconditioned, a new spindle drive motor added, Tailstock Rebuilt & Z-Axis ballscrew recondition in 2004 More Info: http://2spade ...

Be the first to get new results like these -