eBay Classifieds » All ads » For sale » 

engine in Albany

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "engine" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. Miracle Truss Building Kit

    Full Steel Building Kit SEE DESIGN CALCS AND SPECS IN PIX BELOW WYSIWYG: What you see is what you get!!! This is a previously assembled building, now stored in my warehouse. Previous owner erected across his property line and it had to be taken down. It was up for less than 2 years. Exterior is plywood and all of the 2 wood framing is 2 x 6 on purlins. It comes with fully engineered plans and all materials needed EXCEPT: Foundation material and doors. All parts and materials stored inside and in ...

  2. Garage/shop building

    Full Steel Building Kit SEE DESIGN CALCS AND SPECS IN PIX BELOW WYSIWYG: What you see is what you get!!! This is a previously assembled building, now stored in my warehouse. Previous owner erected across his property line and it had to be taken down. It was up for less than 2 years. Exterior is plywood and all of the 2 wood framing is 2 x 6 on purlins. It comes with fully engineered plans and all materials needed EXCEPT: Foundation material and doors. All parts and materials stored inside and in ...

  3. Shop/Garage Kit

    Full Steel Building Kit SEE DESIGN CALCS AND SPECS IN PIX BELOW WYSIWYG: What you see is what you get!!! This is a previously assembled building, now stored in my warehouse. Previous owner erected across his property line and it had to be taken down. It was up for less than 2 years. Exterior is plywood and all of the 2 wood framing is 2 x 6 on purlins. It comes with fully engineered plans and all materials needed EXCEPT: Foundation material and doors. All parts and materials stored inside and in ...

  4. Poreba TR70B (Manual Engine Lathe)

    Poreba TR70B Manual Engine Lathe Swing Over Ways: 30" Distance Between Centers: 118" Spindle Bore: 3.25" EQUIPPED WITH- Threading Taper Attachment Rapid Traverse Carriage 24" 4-Jaw Chuck 20" 3-Jaw Chuck 22" Capacity Steady Rest 15" Capacity Steady Rest More Info: http://2spade.com/PorebaTR70B.html

  5. Axelson 25 x 144 Engine Lathe

    Axelson 25 x 144 Engine Lathe Maximum Swing over Bed: 28 ¾" Maximum Distance between Centers: 144" Bed Length: 18 FT Spindle Speeds: (24) 5 - 467 RPM Feeds: (36) 0.010 - 0.300 IPR (Inches per rotation) Surface Speeds: (18) 20 - 300 FPR (Feet per minute) Motor: 20 HP 220/440 More Info: http://2spade.com/Axelson25x144.html

  6. 1951 Sidney 27X181 (Manual Engine Lathe)

    1951 Sidney 27X181 Manual Engine Lathe Swing over bed: 27.5” Swing over cross slide: 20” Maximum distance b/t centers: 18ft Spindle nose: D1-11 Spindle bore: 2-1/16” Spindle speeds: (16) 8 to 550 RPM Tailstock taper: #5 Feeds: (60) ¾ to 46 IPR Main motor: 30 HP 220/440V Approximate dimension: 27’L X 6’W X 5-1/2’ H Approximate weight: 19,000 # -EQUIPPED WITH- Hard, shiny bed ways 21” 4 jaw chuck, steel Cushman 24” face plate Taper attachment and bed clamp 2 each steady rests, 10” ...

  7. 2007 Birmingham DLC-2080 (Manual Engine Lathe)

    2007 Birmingham DLC-2080 Manual Engine Lathe Swing over bed: 20" Swing over cross slide: 11-3/8" Swing over gap: 30" Length of gap: 10" Distance between centers: 80" Spindle Bore: 4-1/8" (This has the extra bore opening) Spindle nose type (Camlock): D1-8 Spindle taper: MT-6 Spindle speeds: 16 Spindle speed range: 26 - 1,700 RPM Spindle center to bedway: 9-3/4" Threads per inch (No.) range (TPI): (42) 7/16 - 80 Metric threads (No.) range (mm): (37) 0.5 - 80 Module threads (No.) range ...

  8. 2004 Kent USA ML-1740T (Manual Engine Lathe)

    2004 Kent USA ML-1740T Manual Engine Lathe Swing Over Bed: 17” Swing Over Cross slide: 11” Swing Over Gap: 24.5” Width of Bed: 12" Distance Between Centers: 44” Cross Slide Travel: 12” Top Slide Travel: 4.75” Spindle Speeds: 12 Spindle Speed Range: 36–1800 RPM Through Hole Diameter: 3.125" Spindle Nose: D1–6 Spindle to Sleeve Taper: MT#7 – MT#4 Thread capacity (inches): 45, 2 – 72 TPI Thread capacity (metric): 39, 0.2 – 14 mm Longitudinal Feeds: 0.0015”-0.04” in/rev Cross Feeds: 0 ...

  9. 2006 Toolmex TUR 630 MN 4000 (CNC Engine Lathe)

    2006 Toolmex TUR 630 MN 4000 CNC Engine Lathe Control: Siemens 810D Swing Over Bed: 25" Swing Over Cross Slide: 14.6" Distance Between Centers: 157" Max Weight Between Centers: 3,300 LBS Spindle Speeds: 20 - 1,800 rpm Spindle Bore: 5.5" Spindle Motor: 25 hp Spindle Nose: D-11 Tailstock Taper: MT 5 -EQUIPPED WITH- Front & Rear 16" 4-Jaw Chucks Dorian DA Type Tool Post More Info: http://2spade.com/2006ToolmexTUR630MN4000.html

  10. EVERREADY APPLICATION AND ENGINEERING DATA

    EVERREADY APPLICATION AND ENGINEERING DATA 1960'S

  11. JAPAN ELECTRONIC ENGINEERING

    JAPAN ELECTRONIC ENGINEERING

  12. 1988 Dresser Dozer

    5300 hrs, Cummins diesel engine, brand new undercarriage, heat/ac in closed cab, semi v blade. For additional information, please contact seller, D. Foster at 603-496-7725 http://ultimatemp.com/index.php?title=equipment_listing&id=11776

  13. Okuma 46" x 246" Engine Lathe

    1980 Okuma 46" x 246" Engine Lathe Swing Over Ways: 46" Swing Over Cross Slide: 36 " Distance Between Centers: 246" Spindle Speed: 12~1,000 rpm Spindle Bore: 3" Chuck Diameter: 36" Number of Jaws: 4 Equipped With- 36" 4-Jaw Chuck 22" Steady Rest 15" Steady Rest Inch/Metric Threading Taper Attachment

  14. Tos SN 50 C  (Engine Lathe)

    Tos SN 50 C Manual Engine Lathe Swing over bed: 20” Swing over carriage: 10.6” Spindle bore: 2-1/8” Center distance: 80” Voltage: 220/3/60 Horse power: 7.5 Equipped With- Digital Read Out Tail Stock More Info: http://www.2spade.com/TosSN50C.html

  15. 1987 Summit 26X180 (Manual Engine Lathe)

    1987 Summit 26X180 Manual Engine Lathe Swing Over Ways: 26" Distance Between Centers: 180" Spindle Bore: 4-1/4" Chuck Diameter (4 Jaw): 20" -EQUIPPED WITH- Inch/Metric Threading Taper Attachment 20" 4-Jaw Chuck (1) Steady Rest More Info: http://2spade.com/1987Summit26X180.html

  16. 1973 Leblond 75X144 (Manual Hollow Spindle Engine Lathe)

    1973 Leblond 75X144 Manual Hollow Spindle Engine Lathe Swing Over Bed: 75" Swing Over Cross Slide: 52" Centers Distance: 144" Spindle Speed: 300 RPM Spindle Motor: 40 HP -EQUIPPED WITH- (2) 32” chucks Inch Threading 12 ½” spindle hole Full length scanamatic tracer Prints & Manuals Available More Info: http://2spade.com/1973Leblond75X144.html

  17. WOOD CHOPPER!!!!!!! BRUSH branch tree CHIPPER chiper

    Selling my single axle wood chipper chiper. Powered by a ford 4 cylinder gasoline engine. Can chip up to 12 inches diameter. Has a pintle hook on the front and a jack as seen in photo. Has new bearings in it. PLEASE LEAVE A MESSAGE IF CALL IS MISSED!!!!!!!!!!!!!!!!! 978 503 9004 GENE AND SUE AND RYAN

  18. 1973 Leblond 24" REGAL 5 INCH THRU-SPINDLE (Engine Lathe)

    1973 Leblond 24" REGAL 5 INCH THRU-SPINDLE Manual Engine Lathe Swing Over Bed: 24" Distance Between Centers: 120" Spindle Bore: 5.250" Spindle Motor: 20 HP Chuck Size: 24" -EQUIPPED WITH- 24 Inch 4 Jaw Chuck (2) Steady Rests Taper Attachment Newall DRO More Info: http://2spade.com/1973Leblond24REGAL5INCHTHRUSPINDLE.html

  19. 1984 Clausing COLCHESTER 17 (Engine Lathe)

    1984 Clausing COLCHESTER 17 Manual Engine Lathe Full Model: COLCHESTER 17 X 40, 8100 SERIES Swing Over Bed: 17-1/4" Swing Over Cross Slide: 10-1/2" Distance Between Centers: 40" Bar Capacity: 3" Spindle Nose: 8" D 1 CAMLOCK Spindle Hole Thru: 3-1/16" Spindle Speeds: 20 - 1,600 RPM Spindle Motor: 10 HP Machine Weight: 6,000 LBS -EQUIPPED WITH- Geared Head Stock Tail Stock Tool Post Threading (Metric & Inch) 10" 3-Jaw Chuck Pull Out Chip Pan Cross & Longitudinal Feeds Coolant ...

  20. 1944 Leblond NI 34/60 x 96/164 (Manual Sliding Gap Engine Lathe)

    1944 Leblond NI 34/60 x 96/164 Manual Sliding Gap Engine Lathe Swing over bed, gap closed: 34" Max center distance: 96" closed / 164" open Swing over slide: 21.5" Swing through gap: 60" Max length of part turned in gap: 68" Spindle nose: L-3 Spindle speeds: (32) 3.25 to 400 RPM Taper in tailstock: #6 Width of bed: 26" Width of carriage: 40" Threads: (48) ¾ to 46 TPI Feeds: (48) . 004 IPR to .250 IPR Main motor: 40 HP 220V Approx dimensions: 15-1/2'L x 61/2'W x 7'H ...

  21. 1997 Acer DYNAMIC 1740G (Manual Engine Lathe)

    1997 Acer DYNAMIC 1740G Manual Engine Lathe Swing Over Bed: 17" Distance Between Centers: 40" Swing Over Cross Slide: 9-5/8" Spindle Center Height: 8-1/2" Spindle Bore Diameter: 2-1/4" Spindle Nose: D1-6 Spindle Speeds: 50-1,800 RPM Spindle Motor: 7.5 HP Tailstock Taper: MT 4 Machine Dimensions: 88"L x 41"W x 67"H Machine Weight: 4,000 LBS -EQUIPPED WITH- 10" 3-Jaw Chuck Inch & Metric Threading Steady Rest 4-Way Tool Post Coolant System Full Length Splash Guard ...

  22. 2004 Jeep Grand Cherokee Laredo. CAR, Motor and Parts FOR SALE

    - ASKING $2000 - MAKE AN OFFER (near New Hampshire / VT Border line ) Odometer: Clean highway miles - 116000 VIN: 1J4GW48SX4C366363 ~ Automatic ~ PARTS CAR - AS -IS Has a SOLID MOTOR/ ENGINE ~ Engine is clean and runs! THIS CAR WAS SPOTLESS AND ALWAYS KEPT "LIKE NEW". Always has had all regular oil changes, maintenance... I had an accident! I got a new car! Interior is nice... slate grey / black ... ... you can safely drop this engine in a different car body ... AND ... use all the ...

  23. 1998 Clausing Metosa EL2087CS (CNC Engine Lathe)

    1998 Clausing Metosa EL2087CS CNC Engine Lathe Control: Fagor 800T Swing Over Bed: 20.875" Swing In Gap: 30.75" Swing Over Cross Slide: 12.75" Distance Between Centers: 87" Spindle Nose: D1-8 Spindle Speeds: 0-1,700 RPM Spindle Motor: 10 HP Spindle Bore: 3.150" Tailstock Taper: 5 MT Tailstock Travel: 7" Machine Weight: 6,200 LBS -EQUIPPED WITH- 14 Inch, 4 Jaw Chuck Aloris Style Tool Post (6 Tools) External Transformer More Info: http://2spade.com ...

  24. KERRY THE FIRE ENGINE DOG BY FRANK LEWIS

    KERRY THE FIRE ENGINE DOG BY FRANK LEWIS HARD COVER CHILDREN BOOK SHIPPING WEIGHT: 3 LBS

Be the first to get new results like these -