eBay Classifieds  » For sale » Business & industrial » 0 ads for lathe in Albany

Can't find what you are looking for in your area? See more ads from nearby cities.

1. 
   2006 Gray RM-48 (CNC Vertical Turret Lathe)

   Please Contact

   2006 Gray RM-48 CNC Vertical Turret Lathe Control: Fanuc Oi-M Max Swing: 56" Table Size: 48" Table Speeds: 4.8 - 287 RPM Table Motor: 50 HP Height Under Turret Rail: 48" Turret Slide Travel: 30" **Retrofitted With Fanuc CNC Control in 2006** More Info: http://2spade.com/2006GrayRM48.html

   May 22 - Brattleboro : Bellows Falls

2. 
   1965 Monarch 25x264 (Manual Engine Lathe)

   Please Contact

   1965 Monarch 25x264 Manual Engine Lathe Swing Over Ways: 26" Swing Over Cross Slide: 16" Center Distance: 264" Chuck Size (4 Jaw): 15" Spindle Speeds (36): 12~1500 RPM Spindle Hole Size: 2-1/16" Spindle Nose: D1-6 Spindle Motor: 25 HP Floor Space: 48" x 325" Machine Weight: 20,000 LBS Equipped With- Hardened & Ground Ways 4-Way Rapid Traverse To Carriage Inch Threading Apron Controlled Lead Screw Reverse Steady Rest

   May 21 - Brattleboro : Bellows Falls

3. 
   1988 Morando PA-24 (24x160 Engine Lathe)

   Please Contact

   1988 Morando PA-24 Manual Engine Lathe Swing Over Ways: 24" Swing Over Cross Slide: 16" Distance Between Centers: 160" Spindle Speed: 20~1,200 rpm Spindle Bore: 4" Chuck Diameter: 20" Number of Jaws: 4 Equipped With- Inch/Metric Threading Mitutoyo 2-Axis DRO's(Full Bed Length) 20" 4-Jaw Chuck 10" Steady Rest 7" Steady Rest

   May 21 - Brattleboro : Bellows Falls

4. 
   2010 Milltronics ML-26 (CNC Tool Room Lathe)

   Please Contact

   2010 Milltronics ML-26 CNC Tool Room Lathe Control: Centurian 7T Swing Over Bed / Swing Over Saddle / Swing over Gap: 27" / 16.1" / 35" Spindle Speeds: 30 - 1600 RPM Spindle Bore / Bar Cap / Spindle Nose: 6" / 3.58" / A1-11 Main Motor (30 min. / continuous) (two speed): 24 / 15 HP Number of Turret Positions (5 Live): 8 Positions X-Axis Travel: 13" Z-Longitudinal: 70" Floor Space (L x W): 94" x 156" Weight (approx): 11,500 Lbs -EQUIPPED WITH- •Centurian 7T Control •8 magazine tool ...

   May 21 - Brattleboro : Bellows Falls

5. 
   1960 Lodge & Shipley 28"x23ft (Hollow Spindle Engine Lathe)

   Please Contact

   1960 Lodge & Shipley 28"x23ft Hollow Spindle Engine Lathe Swing Over Ways: 28" Swing Over Cross Slide: 17" Distance Between Centers: 276" Spindle Speeds: 8 ~ 450 RPM Spindle Bore: 9" Chucks Diameter: 21" Hole Thru: 9" Number of Jaws: 4 Threading: Yes Taper Attachment: Yes Equipped With Threading Taper Attachment Front & Rear 21" 4-Jaw Chuck w/9" Hole 9" Spindle Bore 16" Capacity Steady Rest 8" Capacity Steady Rest

   May 21 - Brattleboro : Bellows Falls

6. 
   2011 Mazak INTEGREX J-200 (CNC MILLING-TURNING CENTER)

   Please Contact

   2011 Mazak INTEGREX J-200 CNC MILLING-TURNING CENTER CAPACITY: MAX SWING: 20.87" SWING OVER CROSS: 20.87" STANDARD MACHINING DIAMETER: 19.69" MAX MACHINING LENGTH: 19.69" TOOL CHANGER: 36 ATC TRAVELS: X-AXIS: 17.72" Y-AXIS: 7.87" Z-AXIS: 21.65" W-AXIS: 37.40" B-AXIS: -30 - 190 (5 DEGREE INCREMENTS) TURNING SPINDLE: ROTATIONS SPEED: 5,000 RPM THROUGH HOLE DIAMETER: 2.99 BAR CAPACITY: 2.56" MILL SPINDLE: TOOL SHANK TYPE: KM63 MILL SPINDLE MOTOR: 7.5/3.0 KW MILL SPINDLE SPEED: ...

   May 21 - Brattleboro : Bellows Falls

7. 
   2011 Milltronics ML 18/60

   Please Contact

   2011 Milltronics ML 18/60 CNC Tool Room Lathe Control: 7200 CNC Swing Over Bed: 19" Swing Over Cross Slide: 9.25" Centers Distance: 66.9" X Axis Travel (Cross): 12" Z Axis Travel (Long): 63.5" Spindle Bore: 2.56" Spindle Motor: 18/12 HP Spindle Speed: 100-2,600 RPM Spindle Nose: D1-6 Power Consumption: 50 AMPS Machine Dimensions: 139"L x 77"W x 80"H Machine Weight: 8,500 LBS -EQUIPPED WITH- 3 jaw chuck 5C collet chuck Steady rest Follower rest Dorian adjustable tool post Live ...

   May 21 - Brattleboro : Bellows Falls

8. 
   2007 Birmingham DLC-2080 (Manual Engine Lathe)

   Please Contact

   2007 Birmingham DLC-2080 Manual Engine Lathe Swing over bed: 20" Swing over cross slide: 11-3/8" Swing over gap: 30" Length of gap: 10" Distance between centers: 80" Spindle Bore: 4-1/8" (This has the extra bore opening) Spindle nose type (Camlock): D1-8 Spindle taper: MT-6 Spindle speeds: 16 Spindle speed range: 26 - 1,700 RPM Spindle center to bedway: 9-3/4" Threads per inch (No.) range (TPI): (42) 7/16 - 80 Metric threads (No.) range (mm): (37) 0.5 - 80 Module threads (No.) range ...

   May 20 - Brattleboro : Bellows Falls

9. 
   Poreba TR70B (Manual Engine Lathe)

   Please Contact

   Poreba TR70B Manual Engine Lathe Swing Over Ways: 30" Distance Between Centers: 118" Spindle Bore: 3.25" EQUIPPED WITH- Threading Taper Attachment Rapid Traverse Carriage 24" 4-Jaw Chuck 20" 3-Jaw Chuck 22" Capacity Steady Rest 15" Capacity Steady Rest More Info: http://2spade.com/PorebaTR70B.html

   May 18 - Brattleboro : Bellows Falls

10. 
    Axelson 25 x 144 Engine Lathe

    Please Contact

    Axelson 25 x 144 Engine Lathe Maximum Swing over Bed: 28 ¾" Maximum Distance between Centers: 144" Bed Length: 18 FT Spindle Speeds: (24) 5 - 467 RPM Feeds: (36) 0.010 - 0.300 IPR (Inches per rotation) Surface Speeds: (18) 20 - 300 FPR (Feet per minute) Motor: 20 HP 220/440 More Info: http://2spade.com/Axelson25x144.html

    May 18 - Brattleboro : Bellows Falls

11. 
    1951 Sidney 27X181 (Manual Engine Lathe)

    Please Contact

    1951 Sidney 27X181 Manual Engine Lathe Swing over bed: 27.5” Swing over cross slide: 20” Maximum distance b/t centers: 18ft Spindle nose: D1-11 Spindle bore: 2-1/16” Spindle speeds: (16) 8 to 550 RPM Tailstock taper: #5 Feeds: (60) ¾ to 46 IPR Main motor: 30 HP 220/440V Approximate dimension: 27’L X 6’W X 5-1/2’ H Approximate weight: 19,000 # -EQUIPPED WITH- Hard, shiny bed ways 21” 4 jaw chuck, steel Cushman 24” face plate Taper attachment and bed clamp 2 each steady rests, 10” ...

    May 17 - Brattleboro : Bellows Falls

12. 
    1974 Bullard DYNATROL 46 (Vertical Turret Lathe)

    Please Contact

    1974 Bullard DYNATROL 46 Vertical Turret Lathe Year of Make: 1974 Brand: Bullard Model: Dynatrol 46 Swing: 58” Height Under Rail: 40” Table Speed: 9-313 RPM Table Motor: 75 HP Equipped With: Ram & Turret More Info: http://2spade.com/1974BullardDYNATROL46.html

    May 17 - Brattleboro : Bellows Falls

13. 
    1996 Motch 219-VNC (CNC Vertical Turret Lathe, Twin Spindle)

    Please Contact

    1996 Motch 219-VNC CNC Vertical Turret Lathe, Twin Spindle Retrofitted in 1996 Fanuc series 16T CNC control with 14'' color screen 2-Axis carriage (2) 12'' woodworth pull-back chucks 25'' swing Vari-speed 0-1600 RPM 75 Hp spindle drive motor (2) 6 position tool turrets Quick switch holders More Info: http://2spade.com/1996Motch219VNC.html

    May 15 - Brattleboro : Bellows Falls

14. 
    2008 Willis 3280 ENC (Oil Country CNC Turning Center)

    Please Contact

    2008 Willis 3280 ENC Oil Country CNC Turning Center Standard CNC Lathe Features: Fanuc Oi-TC control 8 position vertical electric turret or 4-position horizontal turret Wide RPM range 30HP Spindle Motor 4-Step Spindle Speed Cutting Fluid Coolant System Operation, Programming & Instruction Manuals Full Length Rear Splash Guard Front Chuck & Chip Safety Guards Working Lamp RS-232 Port Front type chip augurs standard (30” lathe-1 rear chip conveyor) Centers and Center Sleeve Leveling ...

    May 15 - Brattleboro : Bellows Falls

15. 
    2006 Romi M 20 (CNC Tool Room Lathe)

    Please Contact

    2006 Romi M 20 CNC Tool Room Lathe Control: Fanuc 21i-T Swing Over Bed: 20" Swing Over Cross: 10" Centers Distance: 62" x Axis Travel: 11" z Axis Travel: 60" Spindle Hole: 2.5" Spindle Nose: A2-6 Spindle Speeds: 2,200 RPM Spindle Motor: 15 HP Number of Turret Postions: 8 Electrics: 230 V, 3 PH, 50/60 HZ Approx Dimensions: 143"L x 65"W x 65"H Machine Weight: 7,750 LBS -EQUIPPED WITH- Tail Stock 8 Position Turret Extra 15", 3 Jaw Chuck Feature Cam 2006 More Info: http://2spade ...

    May 11 - Brattleboro : Bellows Falls

16. 
    Okuma 46" x 246" Engine Lathe

    Please Contact

    1980 Okuma 46" x 246" Engine Lathe Swing Over Ways: 46" Swing Over Cross Slide: 36 " Distance Between Centers: 246" Spindle Speed: 12~1,000 rpm Spindle Bore: 3" Chuck Diameter: 36" Number of Jaws: 4 Equipped With- 36" 4-Jaw Chuck 22" Steady Rest 15" Steady Rest Inch/Metric Threading Taper Attachment

    May 9 - Brattleboro : Bellows Falls

17. 
    Tos SN 50 C (Engine Lathe)

    Please Contact

    Tos SN 50 C Manual Engine Lathe Swing over bed: 20” Swing over carriage: 10.6” Spindle bore: 2-1/8” Center distance: 80” Voltage: 220/3/60 Horse power: 7.5 Equipped With- Digital Read Out Tail Stock More Info: http://www.2spade.com/TosSN50C.html

    May 9 - Brattleboro : Bellows Falls

18. 
    1968 Lansing G-9 (Hollow Spindle Engine Lathe)

    Please Contact

    1968 Lansing G-9 Hollow Spindle Engine Lathe Type: Oil Country - Hollow Spindle Spindle Thru Hole: 9-1/4" Spindle Motor: 19 HP Bed Length: 12ft Distance Between Centers: 10'6" -EQUIPPED WITH- Steady Rest Extra Chuck More Info: http://2spade.com/1968LansingG9.html

    May 2 - Brattleboro : Bellows Falls

19. 
    2000 Eurotech 730 SL-Y (CNC Multi Axis Lathe)

    Please Contact

    2000 Eurotech 730 SL-Y CNC Multi Axis Turning Center Control: Fanuc 18i-T Bar Capacity: 2.625" Max. Mach. Dia: 9.842" Max. mach. length: 19.685" Max. Swing: 20.472" Main Spindle Speed: 4000 RPM Main Spindle Nose: A2-6 Main Spindle Motor HP: 30 HP Sub Spindle Speed: 4000 RPM Sub Spindle Nose: A2-5 Sub I.D. drawtube: 1.692" Sub Spindle Motor: 7 HP No. of Turret Stations: 12 Live Tool Turret Positions: 12 Live Tool Speeds: 3000 RPM Live Tool Motor: 5 HP Total Machine Dimensions: L158 ...

    Apr 11 - Brattleboro : Bellows Falls

20. 
    John Lang 44x100

    Please Contact

    John Lang 44x100 Engine Lathe Swing Over Ways: 44" Distance Between Centers: 100" Spindle Speeds: 13~380 RPM Spindle Bore: 4.5" Main Motor: 30 HP Chuck Diameter: 40" (4 Jaw) -EQUIPPED WITH- 40" 4-Jaw Chuck Spare Chuck Steady Rest Inch/Metric Threading Tool Post More Info: http://2spade.com/JohnLang44x100.html

    Apr 11 - Brattleboro : Bellows Falls

21. 
    2009 Hurco TM8 (CNC Turning Center)

    Please Contact

    2009 Hurco TM8 CNC Turning Center Control: Max Max Swing Over Bed: 21.6" Max Swing Over Carriage: 11.8" Cross Travel (X-Axis): 8" Longitudinal Travel (Z-Axis): 20" Rapid Traverse Rate (X-Axis): 750 IPM Rapid Traverse Rate (Z-Axis): 945 IPM Turret Tool Positions: 10 Total Bar Capacity: 2" Spindle Nose: A2-6 Spindle Speed Range: 4,800 RPM Spindle Horsepower: 22 HP Approximate Machine Dimensions: 116"L x 91"W x 80"H Approximate Machine Weight: 8,160 LBS -EQUIPPED WITH- Lathe Max ...

    Apr 9 - Brattleboro : Bellows Falls

22. 
    2006 HAAS SL-30T (CNC TURNING CENTER)

    Please Contact

    2006 HAAS SL-30T CNC TURNING CENTER 20 HP VECTOR DRIVE SPINDLE 10" X 20" MAX. 20" SWING 2” BAR CAPACITY HYBRID TURRET (6)BOLT ON–(6)VDI40 STATIONS 50-4000 RPM 8" HYDRAULIC CHUCK 15” COLOR MONITOR USB PORT 1 MG MEMORY OPTIONS INCLUDED: HYBRID 12 STATION TURRET LATHE TOOL PRESETTER LATHE CHIP AUGER SYSTEM IPS-L INTUITIVE PROGRAMMING SYSTEM PTS20 FULLY PROGRAMMABLE HYDRAULIC TAILSTOCK PARTS CATCHER

    Apr 9 - Brattleboro : Bellows Falls

23. 
    1944 Axelson 25X180 (Heavy Duty Engine Lathe)

    Please Contact

    1944 Axelson 25X180 Heavy Duty Engine Lathe Swing: 25" Swing Over Cross: 18" Distance Between Centers: 180" Spindle Bore: 4-1/8" Spindle Speed: 555 RPM Spindle Motor: 20 HP Equipped With- 21" Chuck (4) steady rests ranging from (9" to 20")

    Apr 9 - Brattleboro : Bellows Falls

24. 
    1989 South Bend 750 Engine Lathe

    Please Contact

    1989 South Bend 750 Engine Lathe Swing Over Ways: 29" Swing Over Cross Slide/Carriage: 16.75" Distance Between Centers: 157" Spindle Speed: 750 RPM Spindle Bore: 4-1/4" Chuck Diameter: 15-1/2" (3 Jaw) Machine Weight: 13,750 LBS -EQUIPPED WITH- Inch/Metric Threading 40"(approx) Swing in Removable Gap(10" Gap Length) 15-1/2 3-Jaw Chuck More Info: http://2spade.com/1989SouthBend750.html

    Apr 9 - Brattleboro : Bellows Falls