eBay Classifieds » All ads » For sale » Business & industrial » 

lathe in Albany

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "lathe" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. 1988 Morando PA-24 (24x160 Engine Lathe)

    1988 Morando PA-24 Manual Engine Lathe Swing Over Ways: 24" Swing Over Cross Slide: 16" Distance Between Centers: 160" Spindle Speed: 20~1,200 rpm Spindle Bore: 4" Chuck Diameter: 20" Number of Jaws: 4 Equipped With- Inch/Metric Threading Mitutoyo 2-Axis DRO's(Full Bed Length) 20" 4-Jaw Chuck 10" Steady Rest 7" Steady Rest

  2. 1965 Monarch 25x264 (Manual Engine Lathe)

    1965 Monarch 25x264 Manual Engine Lathe Swing Over Ways: 26" Swing Over Cross Slide: 16" Center Distance: 264" Chuck Size (4 Jaw): 15" Spindle Speeds (36): 12~1500 RPM Spindle Hole Size: 2-1/16" Spindle Nose: D1-6 Spindle Motor: 25 HP Floor Space: 48" x 325" Machine Weight: 20,000 LBS Equipped With- Hardened & Ground Ways 4-Way Rapid Traverse To Carriage Inch Threading Apron Controlled Lead Screw Reverse Steady Rest

  3. 1960 Lodge & Shipley 28"x23ft (Hollow Spindle Engine Lathe)

    1960 Lodge & Shipley 28"x23ft Hollow Spindle Engine Lathe Swing Over Ways: 28" Swing Over Cross Slide: 17" Distance Between Centers: 276" Spindle Speeds: 8 ~ 450 RPM Spindle Bore: 9" Chucks Diameter: 21" Hole Thru: 9" Number of Jaws: 4 Threading: Yes Taper Attachment: Yes Equipped With Threading Taper Attachment Front & Rear 21" 4-Jaw Chuck w/9" Hole 9" Spindle Bore 16" Capacity Steady Rest 8" Capacity Steady Rest

  4. 2010 Milltronics ML-26 (CNC Tool Room Lathe)

    2010 Milltronics ML-26 CNC Tool Room Lathe Control: Centurian 7T Swing Over Bed / Swing Over Saddle / Swing over Gap: 27" / 16.1" / 35" Spindle Speeds: 30 - 1600 RPM Spindle Bore / Bar Cap / Spindle Nose: 6" / 3.58" / A1-11 Main Motor (30 min. / continuous) (two speed): 24 / 15 HP Number of Turret Positions (5 Live): 8 Positions X-Axis Travel: 13" Z-Longitudinal: 70" Floor Space (L x W): 94" x 156" Weight (approx): 11,500 Lbs -EQUIPPED WITH- •Centurian 7T Control •8 magazine tool ...

  5. 2011 Mazak INTEGREX J-200 (CNC MILLING-TURNING CENTER)

    2011 Mazak INTEGREX J-200 CNC MILLING-TURNING CENTER CAPACITY: MAX SWING: 20.87" SWING OVER CROSS: 20.87" STANDARD MACHINING DIAMETER: 19.69" MAX MACHINING LENGTH: 19.69" TOOL CHANGER: 36 ATC TRAVELS: X-AXIS: 17.72" Y-AXIS: 7.87" Z-AXIS: 21.65" W-AXIS: 37.40" B-AXIS: -30 - 190 (5 DEGREE INCREMENTS) TURNING SPINDLE: ROTATIONS SPEED: 5,000 RPM THROUGH HOLE DIAMETER: 2.99 BAR CAPACITY: 2.56" MILL SPINDLE: TOOL SHANK TYPE: KM63 MILL SPINDLE MOTOR: 7.5/3.0 KW MILL SPINDLE SPEED: ...

  6. 2011 Milltronics ML 18/60

    2011 Milltronics ML 18/60 CNC Tool Room Lathe Control: 7200 CNC Swing Over Bed: 19" Swing Over Cross Slide: 9.25" Centers Distance: 66.9" X Axis Travel (Cross): 12" Z Axis Travel (Long): 63.5" Spindle Bore: 2.56" Spindle Motor: 18/12 HP Spindle Speed: 100-2,600 RPM Spindle Nose: D1-6 Power Consumption: 50 AMPS Machine Dimensions: 139"L x 77"W x 80"H Machine Weight: 8,500 LBS -EQUIPPED WITH- 3 jaw chuck 5C collet chuck Steady rest Follower rest Dorian adjustable tool post Live ...

  7. 2006 Gray RM-48 (CNC Vertical Turret Lathe)

    2006 Gray RM-48 CNC Vertical Turret Lathe Control: Fanuc Oi-M Max Swing: 56" Table Size: 48" Table Speeds: 4.8 - 287 RPM Table Motor: 50 HP Height Under Turret Rail: 48" Turret Slide Travel: 30" **Retrofitted With Fanuc CNC Control in 2006** More Info: http://2spade.com/2006GrayRM48.html

  8. 1953 Monarch 20X120 (Engine Lathe)

    1953 Monarch 20X120 Manual Engine Lathe Catalogue Size: 20" Serial Number: 36960 Actual Swing: 22.5" Distance Between Centers: 120" Date Built: 9-1953 -EQUIPPED WITH- Tailstock Threading Taper Attachment More Info: http://2spade.com/1953Monarch20X120.html

  9. 1976 Hardinge HLV-H (Precision Tool Room Lathe)

    1976 Hardinge HLV-H Precision Tool Room Lathe Spindle construction: Hardinge ball bearing Spindle Round 5C collets: 1-1/16" Spindle Step chucks: 1-1/16" to 6" Spindle Jaw chucks: 5" Spindle Expanding collets: 3" Variable spindle speeds: 125 - 3,000 RPM Hole through spindle: 1-1/4" Swing over bed: 11" Swing over cross slide: 6" Distance between centers: 18" Compound slide travel: 3" Carriage power feed range: 5/16 - 7 IPM Cross slide power feed range: 3/16 - 4 IPM ...

  10. Poreba TR70B (Manual Engine Lathe)

    Poreba TR70B Manual Engine Lathe Swing Over Ways: 30" Distance Between Centers: 118" Spindle Bore: 3.25" EQUIPPED WITH- Threading Taper Attachment Rapid Traverse Carriage 24" 4-Jaw Chuck 20" 3-Jaw Chuck 22" Capacity Steady Rest 15" Capacity Steady Rest More Info: http://2spade.com/PorebaTR70B.html

  11. Axelson 25 x 144 Engine Lathe

    Axelson 25 x 144 Engine Lathe Maximum Swing over Bed: 28 ¾" Maximum Distance between Centers: 144" Bed Length: 18 FT Spindle Speeds: (24) 5 - 467 RPM Feeds: (36) 0.010 - 0.300 IPR (Inches per rotation) Surface Speeds: (18) 20 - 300 FPR (Feet per minute) Motor: 20 HP 220/440 More Info: http://2spade.com/Axelson25x144.html

  12. 1974 Bullard DYNATROL 46 (Vertical Turret Lathe)

    1974 Bullard DYNATROL 46 Vertical Turret Lathe Year of Make: 1974 Brand: Bullard Model: Dynatrol 46 Swing: 58” Height Under Rail: 40” Table Speed: 9-313 RPM Table Motor: 75 HP Equipped With: Ram & Turret More Info: http://2spade.com/1974BullardDYNATROL46.html

  13. 1951 Sidney 27X181 (Manual Engine Lathe)

    1951 Sidney 27X181 Manual Engine Lathe Swing over bed: 27.5” Swing over cross slide: 20” Maximum distance b/t centers: 18ft Spindle nose: D1-11 Spindle bore: 2-1/16” Spindle speeds: (16) 8 to 550 RPM Tailstock taper: #5 Feeds: (60) ¾ to 46 IPR Main motor: 30 HP 220/440V Approximate dimension: 27’L X 6’W X 5-1/2’ H Approximate weight: 19,000 # -EQUIPPED WITH- Hard, shiny bed ways 21” 4 jaw chuck, steel Cushman 24” face plate Taper attachment and bed clamp 2 each steady rests, 10” ...

  14. 2007 Birmingham DLC-2080 (Manual Engine Lathe)

    2007 Birmingham DLC-2080 Manual Engine Lathe Swing over bed: 20" Swing over cross slide: 11-3/8" Swing over gap: 30" Length of gap: 10" Distance between centers: 80" Spindle Bore: 4-1/8" (This has the extra bore opening) Spindle nose type (Camlock): D1-8 Spindle taper: MT-6 Spindle speeds: 16 Spindle speed range: 26 - 1,700 RPM Spindle center to bedway: 9-3/4" Threads per inch (No.) range (TPI): (42) 7/16 - 80 Metric threads (No.) range (mm): (37) 0.5 - 80 Module threads (No.) range ...

  15. 2004 Kent USA ML-1740T (Manual Engine Lathe)

    2004 Kent USA ML-1740T Manual Engine Lathe Swing Over Bed: 17” Swing Over Cross slide: 11” Swing Over Gap: 24.5” Width of Bed: 12" Distance Between Centers: 44” Cross Slide Travel: 12” Top Slide Travel: 4.75” Spindle Speeds: 12 Spindle Speed Range: 36–1800 RPM Through Hole Diameter: 3.125" Spindle Nose: D1–6 Spindle to Sleeve Taper: MT#7 – MT#4 Thread capacity (inches): 45, 2 – 72 TPI Thread capacity (metric): 39, 0.2 – 14 mm Longitudinal Feeds: 0.0015”-0.04” in/rev Cross Feeds: 0 ...

  16. 2006 Toolmex TUR 630 MN 4000 (CNC Engine Lathe)

    2006 Toolmex TUR 630 MN 4000 CNC Engine Lathe Control: Siemens 810D Swing Over Bed: 25" Swing Over Cross Slide: 14.6" Distance Between Centers: 157" Max Weight Between Centers: 3,300 LBS Spindle Speeds: 20 - 1,800 rpm Spindle Bore: 5.5" Spindle Motor: 25 hp Spindle Nose: D-11 Tailstock Taper: MT 5 -EQUIPPED WITH- Front & Rear 16" 4-Jaw Chucks Dorian DA Type Tool Post More Info: http://2spade.com/2006ToolmexTUR630MN4000.html

  17. 2008 Willis 3280 ENC (Oil Country CNC Turning Center)

    2008 Willis 3280 ENC Oil Country CNC Turning Center Standard CNC Lathe Features: Fanuc Oi-TC control 8 position vertical electric turret or 4-position horizontal turret Wide RPM range 30HP Spindle Motor 4-Step Spindle Speed Cutting Fluid Coolant System Operation, Programming & Instruction Manuals Full Length Rear Splash Guard Front Chuck & Chip Safety Guards Working Lamp RS-232 Port Front type chip augurs standard (30” lathe-1 rear chip conveyor) Centers and Center Sleeve Leveling ...

  18. 1996 Motch 219-VNC (CNC Vertical Turret Lathe, Twin Spindle)

    1996 Motch 219-VNC CNC Vertical Turret Lathe, Twin Spindle Retrofitted in 1996 Fanuc series 16T CNC control with 14'' color screen 2-Axis carriage (2) 12'' woodworth pull-back chucks 25'' swing Vari-speed 0-1600 RPM 75 Hp spindle drive motor (2) 6 position tool turrets Quick switch holders More Info: http://2spade.com/1996Motch219VNC.html

  19. 2012 Doosan PUMA VTS1214M (CNC Vertical Turret Lathe)

    2012 Doosan PUMA VTS1214M CNC Vertical Turret Lathe Control: Fanuc 32iTA Max Swing: 55.12" Chuck Diameter: 40" Ram Stroke (Z Axis): 31.5" Spindle Speed (2 Speed Gear Box): 630 RPM Spindle Motor: 80 HP C-Axis Minimum Indexing Increment: .001 DEG Cross Rail Elevation (5.9" X 4 Steps): 23.62" Number of Turret Stations: 5 Turn Tool Capcity: 15 ATC Number of Milling Stations: 9 Maximum Turning Height: 32" Machine Weight: 57,200 LBS More Info: http://2spade.com ...

  20. Okuma 46" x 246" Engine Lathe

    1980 Okuma 46" x 246" Engine Lathe Swing Over Ways: 46" Swing Over Cross Slide: 36 " Distance Between Centers: 246" Spindle Speed: 12~1,000 rpm Spindle Bore: 3" Chuck Diameter: 36" Number of Jaws: 4 Equipped With- 36" 4-Jaw Chuck 22" Steady Rest 15" Steady Rest Inch/Metric Threading Taper Attachment

  21. Tos SN 50 C  (Engine Lathe)

    Tos SN 50 C Manual Engine Lathe Swing over bed: 20” Swing over carriage: 10.6” Spindle bore: 2-1/8” Center distance: 80” Voltage: 220/3/60 Horse power: 7.5 Equipped With- Digital Read Out Tail Stock More Info: http://www.2spade.com/TosSN50C.html

  22. 2006 Romi M 20 (CNC Tool Room Lathe)

    2006 Romi M 20 CNC Tool Room Lathe Control: Fanuc 21i-T Swing Over Bed: 20" Swing Over Cross: 10" Centers Distance: 62" x Axis Travel: 11" z Axis Travel: 60" Spindle Hole: 2.5" Spindle Nose: A2-6 Spindle Speeds: 2,200 RPM Spindle Motor: 15 HP Number of Turret Postions: 8 Electrics: 230 V, 3 PH, 50/60 HZ Approx Dimensions: 143"L x 65"W x 65"H Machine Weight: 7,750 LBS -EQUIPPED WITH- Tail Stock 8 Position Turret Extra 15", 3 Jaw Chuck Feature Cam 2006 More Info: http://2spade ...

  23. 2005 Haas TL-1 (CNC Tool Room Lathe)

    2005 Haas TL-1 CNC Turning Center Control: Haas Swing Over Front Apron: 16" Swing Over Cross Slide: 9.5" Chuck Size: 8" Max Cutting Diameter: 16" Max Cutting Length: 30" Distance Between Centers: 30" Max Spindle Speed: 1,800 RPM Spindle Motor: 7.5 HP Spindle Nose: A2-5 Spindle Bore: 2.31" Machine Weight: 4,100 Lbs More Info: http://2spade.com/2005HaasTL1.html

  24. 1987 Summit 26X180 (Manual Engine Lathe)

    1987 Summit 26X180 Manual Engine Lathe Swing Over Ways: 26" Distance Between Centers: 180" Spindle Bore: 4-1/4" Chuck Diameter (4 Jaw): 20" -EQUIPPED WITH- Inch/Metric Threading Taper Attachment 20" 4-Jaw Chuck (1) Steady Rest More Info: http://2spade.com/1987Summit26X180.html

Be the first to get new results like these -